18,000btu (4.53kW) Cool & Heat Window Air Con Unit OUT OF STOCK Price: £609.99 incVAT
This high-powered air conditioning unit is installed through a wall (<20cm thick) or window and is sat on brackets with two thirds of the unit hanging outside the building and one third inside.
Unlike a split system air conditioner, this removes the need to install separate internal and external elements as both jobs are done by the one unit. And as this model also incorporates a heating function that provides up to 5.2kW of heat, it is sure to be as useful in the winter as it is in the summer.
Also, unlike a portable system this removes the need to leave a window slightly open to vent the hot air and it doesn't require any manual condensation drainage as it drains externally.
A remote control provides full control over all operations, including a timer feature that automatically shuts down the unit after a preset period.
This type of air conditioner is very convenient for rooms that have sash windows, as the unit can be placed on brackets through the window with the sash window simply lowered onto it and blanking plates (not supplied) put on either side to seal the window for maximum cooling.
For full details on how this type of system works click here.
This air conditioner has thermostatic control so will switch itself on and off depending on the ambient internal temperature and will cool a room up to 40m2.
The installation of this unit through a wall will need to be handled by someone competant in DIY as it will involved creating a hole through an external wall large enough to fit the entire unit.
These units are popular in conservatories as they can be installed through the supporting brickwork around the bottom of the conservatory.
Please click here to download the installation and technical manual.
Due to health & safety regulations, our couriers are unable to carry this item up stairs so when a lift is not available it must be delivered to the ground floor of a premises.
Shopping Basket
