Plumbed-In Water Cooler with Fridge & Hot Water OUT OF STOCK Price: £269 incVAT
OUT OF STOCK
This plumbed-in water cooler is a great economical alternative to bottled water coolers. In fact it can pay for itself in around 20 weeks when compared to hiring a water cooler.
It is easy to plumb-in and set up, comes with easy to follow instructions and can supply up to 25 litres of chilled water and 8 litres of hot.
This water cooler also has a convenient 20 litre fridge for storing for staff lunches, sandwiches, snacks or chilled cans.
The hot water is ideal for tea, coffee or hot chocolate and can be set to between 35-95°C. The hot water tap has a lock to prevent accidental use. Chilled milk could also be kept in the built-in fridge for added convenience.
A cup dispenser comes with the unit and is easily attached to the side of the unit with the screws supplied.
Using bottled water coolers has the inconvenience of having to buy and store water bottles. Bottled water is also heavy to lift and can present a health and safety risk at work. Plumbed-in water coolers are much easier to use as you never have to worry about running out of water.
A water filter with anti-scale technology can be placed on the water inlet to purify the water before introducing it to the unit. The anti-scale technology reduces the build-up of limescale on the heating elements maintaining the efficiency of the heater. To purchase this see the multi-buy section at the foot of this page.
This unit has a compact design, steel frame and side panels, and QYA anti-bacterial impregnated plastic panels. Twin water level float sensors ensure the unit is safe to operate and an overfill sensor also has a buzzer alarm.
LED lights indicate when the temperature is reached in the cold and hot water supply tanks and up to a litre of water can be removed at one time before the tanks start to refill. This means that you can take off large amounts of water without changing the tanks' temperature with freshly added water.
The large removable drip tray can be placed in a dishwasher and the nozzles are recessed to protect them from contamination.
The temperature of the cold water supply can be set at between 5-15 degrees C by setting the thermostat housed within the rear panel.
Shopping Basket
