Product Categories
- Air curtains
- Air purifiers
- Ceiling fans
- Dehumidifiers
- Desiccant moisture absorbers
- Evaporative coolers
- Fans
- Heaters-convector
- Heaters-fan
- Heaters-industrial
- Heaters-panel
- Heaters-patio
- Humidifiers
- Oil filled radiators
- Weather stations
- Spares
Have a question?
Call our experts
0800 840 5757
Open Mon-Fri 9am-5pm (4:30pm on Fri)
Commercial Hot Water Softener <4,189L/Day
DISCONTINUED
£995.75
inc VAT
Features & Benefits
- Robust rationally moulded cabinet
- Brass fittings for water <60°C
- Timer controlled regeneration
- Suitable for treating up to 4,189 litre of water @200ppm per regeneration
- Two years labour and parts warranty
- Free installation helpline - 01279 780250 (normal call charges apply)
- Description
- Technical Data
DISCONTINUED
This commercial hot water cabinet water softener is ideal for use in hotels, restaurants, hospitals, nursing homes and food processing plants.
It will prevent formation of scale on heating elements in glass, dish or cutlery washers, beverage vending machines, combination ovens, steamers and laundry equipment.
This will improve the performance of heating elements, lower servicing costs, reduce machinery downtime, increase equipment life and improve cleaning quality.
The commercial water softener works by passing water through a cylinder containing ion exchange resin beads. The hardness salts - calcium and magnesium ions - are attracted to the resin and removed from the water. The resin is automatically cleaned (regenerated) by rinsing a small amount of brine through the cylinder. The accumulated hardness does not enter the water supply, but is automatically flushed away to a nearby drain. Refreshed by regeneration, the resin is again ready to remove hardness.
The frequency of regeneration depends on the hardness and volume of the water being used. It takes place automatically and is initiated by a timer. The freqency is set by pushing in the pins on the skipper wheel. Once set the softener will automatically regenerate at the pre-determined interval - normally at 2am.
There is also a manual override to enable a regeneration to be initiated at any other time.
This commercial water softener is suitable for softening water that has been heated up to 60°C. It will treat up to 4,189 litres of water between regenerations at 200ppm (a measurement of water hardness).
Buy this commercial water softener from us and you will have access to our installation telephone helpline. Simply call 01279 780250 during office hours, ask for the installation helpdesk and an expert technician will be on hand to assist you.
Dimensions: H690mm x W275mm x D450mm
Salt per regeneration: 2.8kg
Product code: HW18
Litres of water treated between generation at different hardnesses:
4,189 @ 200ppm
3,658 @ 239ppm
3,260 @ 257ppm
2,929 @ 286ppm
2,668 @ 314ppm
2,442 @ 343ppm
2,252 @ 372ppm
2,094 @ 400ppm
1,953 @ 429ppm
1,675 @ 500ppm
1,464 @ 572ppm
1,303 @ 643ppm
Please contact your water company for your local water hardness level.






