Symphonia Floor/Ceiling Split Air ConditionersSuitable for areas up to 45m²
Price: £939 incVAT
This unit must be installed by a qualified air conditioning engineer or the warranty will be void. We offer installation services in the BH, SO, PO, BN, GU & RH postcodes. This service is offered to residential customers as an associated product at the bottom of this page. For commercial installations please call 01903 858657.
This range of air conditioner is equally at home standing upright as a floor unit or fitted horizontally to the ceiling, either choice will provide you with a slim-line air conditioner. The Symphonia floor/ceiling air conditioners are ideal to use in the office or at a restaurant, it can also be used in the home.
This 5.27kw unit is suitable to do areas up to 45m² but if there are additional heat sources in the room you may require a higher output.
The system comprises of a fan unit that is situated in the room that is to be cooled and a compressor that is to be located externally. The Symphonia floor/ceiling air conditioner will provide you with cooling, heating and a dehumidification mode. It will also purify the air passing through the system with a washable filter.
An auto function will allow you to set your desired room temperature and have the unit activate the cooling and heating functions accordingly to maintain it. The fan speed will adjust itself depending on how far from the set point it is.
The desired temperature can be set from 17-30°C and a timer function enables you to programme the unit to turn itself on or off within a set period.
An Eco-Sleep mode will run the unit in an energy saving mode. This means that the length of time that the compressor runs is limited by an automatic and gradual temperature increase (in cooling mode) or decrease (in heating mode) of 1 degree from the set temperature after one hour. After two hours another 1 degree alteration occurs. The unit will then maintain the temperature consistently for 7 hours before turning off.
There are 3 different fan speeds for either rapid temperature adjustment or for quieter operation.
The cool air can be gently directed around the room by an automatic swing feature on the air outlets. Alternatively these can be set and maintained at your desired position.
All features of the air conditioner are controlled with the LCD display remote control.
This Symphonia air conditioner uses advanced zero ozone depleting 410a refrigerant gas.
Technical data
Dimensions indoor unit H660mm x W995mm x D198mm
Dimensions outdoor unit H695mm x W845mm x D335mm
Weight: Indoor unit 30kg | Outdoor unit 57kg
Capacity: Cooling 5.27kW (18,000btu) | Heating 6.01kW
Input voltage: 230V / 50Hz / 1ph
Nominal current: Cooling 8.8A | Heating 8.8A
Nominal input: Cooling 1,900W | Heating 1,900W
Electrical protection: 16A (curve A or aM)
Main power supply: indoor
Main electrical wiring section: 3Nb x 2.5mm2
Section connection ind/outd: 5Nb x 2.5mm2 + 1Nb x 0.5mm2(shielded wiring cable should be used for outdoor coil sensor signal)
Energy efficiency class: Cooling D | Heating D
EER / COP: 2.77 / 3.16 W/W
Indoor airflow high fan: 800 / 600 / 500 m3/h
Outdoor airflow: 2,400 m3/h
Dehumidification: 1.8l/h
Indoor unit noise level: 38dB(A)
Outdoor unit noise level: 48dB(A)
Compressor: Rotary
Initial refrigerant charge in outdoor unit: 2,050g (5m)
Liquid/gas pipe diameters: 1/4in - 1/2in
Max piping length: 25m
Max piping height: 15m
Additional charge: 30g/m
Condensation pipe out diameter: 25mm
Working limits: Cooling max 32oC indoor / 43oC outdoor
Working limits: Cooling min 21oC indoor / -5oC(low ambience kit fitted in factory) outdoor
Working limits: Heating max 24oC indoor / 24oC outdoor
Working limits: Heating min 20oC indoor / -7oC outdoor
Features & Benefits: Floor standing or ceiling mounted Cooling, heating and dehumidification mode Washable air filter Sleep mode & Auto mode Three fan speeds Remote control Set temperature from 17-30°C On/Off timer Advanced zero ozone depleting 410a refrigerant gas |