Feedback

Product Categories

1-Hour Delivery Window Information

Have a question?

Call our experts

0800 840 5757

Open Mon-Fri 9am-5pm (4:30pm on Fri)




54mm Commercial Cracker Scale Inhibitor


DISCONTINUED NOVEMBER 2010

£1,417.54

 inc VAT

""


Features & Benefits

  • Suitable for 54mm copper pipe connection
  • Prevents scale build-up and removes existing scale
  • Fits to incoming water mains (requires power supply)
  • Long lasting protection for stored water
  • No maintenance
  • Doesn't use chemicals or salt
  • Not affected by flow rates
  • Dual technology - electronic & electrolytic
  • Description
  • Technical Data
1-Hour Delivery Window Information

DISCONTINUED NOVEMBER 2010

Sorry this Scale Inhibitor was discontinued in November 2010.

Pipe size: 54mm
Connection: 54mm copper compression
Design flow: 0-255l/min (15.3m³/hr) requiring ∆p=0.26bar
∆p=1/2 bar flow: 375l/min (22.5m³/hr)
Length: 436mm
Width & depth: 120mm x 98mm
Weight: 5.5kg
Voltage: 220v 50Hz
Product code: CRACKER54
Test regulations: (UK) WRAS Certification 0107038 | (Germany) RWTuV Prufprogramm M30/94 Certificate Nr. 2684/95
Materials used: Mild steel box with electronic circuit board to IP20. Anode case body: copper BS2871 Pt. 1 Table X. Anode support: grilamid L20G natural. Anode material: pure zinc & magnesium BS6561
Construction: The anode assembly is pressed into the copper body and locked into position. The copper anode casing diameter is reduced at the ends and brazed to the end connectors. The unit cannot be opened. The electronics are housed in a boz which surrounds the anode assembly section, is compliant with EU Directive 89/336/EEC (EMC). The unit is powered by 22v 50Hz 500mA power-pack.

The Cracker (tested to 35 bar) is designed to work to a maximum system pressure of 20 bar treating a mains water supply at between 2-40°C, with a maximum system flow rate of 2m/sec (for silent operation) in the nominal pipe size for the product. The water should have a pH range of 5.0-8.5.