This wall-mounted electric fan heater will discreetly provide 1.25kW and 2.5kW heating output without the inconvenience of having a floor standing radiator or fan heater.
An LCD display allows you to set the desired temperature as well as see the current room temperature.
A cool air feature enables the fan to run without the heater to provide air circulation in the summer.
A diffuser feature will oscillate the air outlet vanes to help circulate the warm air around a room. A timer will allow you to set the unit to turn itself off in up to 8 hours time.
All functions are controllable via the remote control.
The wall-mounted heater is easy to install as it slots on to two screws supplied with the unit. The heater also incorporates an overheat protection feature that will stop the heater if it is covered or overheats.
This heater is not suitable for use in bathrooms and needs to be installed at a minimum of 1.8m high. Also the heater is unable to be used with a separate timer.
Did you know that heaters dry the air? See below for a humidifier to combat this.
Technical data
Dimensions:H230mm x W700mm x D125mm Power: 2.5kW on highest output Voltage: 230V / 50Hz Weight:5 Installation: Minimum 1.8m high Product code: HEATWALL321
Features & Benefits:
1.25kW & 2.5kW heat outputs
LCD display
Cool air feature for summer use
8 hour timer
Oscillating air outlet vanes
Remote control
Easy to install
Approximate running cost of 25p an hour (based on a unit of electricity costing 10p)